Wega Mininova - Dispensing Coffee

57
use and maintenance manual
ENGLISH
• Put the coffee cup under the dispensing spout;
• press the dispensing switch (
1);
• upon reaching the desired amount of coffee in the cup, stop
dispensing by means of the switch (1).
Coffee dispensing:
• put the coffee cup under the dispensing spout.
• press the desired dose key (2): wait for coffee to be deliv-
ered;
• to stop delivery of coffee in advance, press the delivery key
again (2) or press the keyPROG/STOP (3).
Push button panel programming:
• put the coffee cup under the dispensing spout.
• press the PROG/STOP key (
3) for at least 5 seconds until
the LED of the dose keys comes on;
• Press the desired dose key(2).
• when the desired dose has been attained, confirm by pressing
the PROG/STOP key (3);
• Repeat this operation for the other dose keys.
• automatic exit from programming after 5 seconds.
WARNING
During the programming phase the LED (4) fl ashes.
If the LED (
4) fl ashes more frequently, refer to the chapter “Malfunctions and relative
solutions”.
EPU version (semiautomatic)
4.3 DISPENSING COFFEE
EVD version (electronic dosing)
5
2
2
1
5
2
2
2
3
4
2 3
PROG.
STOP