Wegmatt dAISy 2+ - Connecting dAISy with other software

Page 5
v2.0
2.7 Connecting dAISy with other software
dAISy presents itself to computers as a virtual serial port. See the OS-specific chapters above about
installation to learn how to determine the serial port.
The serial communication parameters of dAISy are:
Baud rate
38400
Data bits
8
Parity
None
Stop bits
1
Flow control
None
Depending on the software dAISy is used with, some or all these parameters have to be configured. For
details, please refer to the instruction manual of the respective application.