EasyManuals Logo

WEICHAI WD10 Manual

WEICHAI WD10
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
49
Attached table: fault cause and remedy.
Ignition key
switch
Starter
cause remedy
1. Fuel intake lter screen of supply
pump or hose clogged
Clear away the dirt and check if the
fuel is clean
2. Air entered into the fuel system
Drain off the air, check the sealing of
the connector and repair it
3. Injection pump damaged
Check plunger, fuel outlet valve and
repair or replace the broken parts
4. Injector damaged
Check the atomization of injector, and
repair it
5. Initial angles of valve gear or fuel
delivery is wrong
Check and adjust it
6. High pressure line damaged or leaked Repair or replace
7. Insufcient pressure in cylinder
Check the sealing of the valve and
cylinder gasket and the wear of the
piston ring. Repair or replace
8. The temperature is too low With the addition of start-assist device

Table of Contents

Other manuals for WEICHAI WD10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WEICHAI WD10 and is the answer not in the manual?

WEICHAI WD10 Specifications

General IconGeneral
BrandWEICHAI
ModelWD10
CategoryEngine
LanguageEnglish

Related product manuals