EasyManuals Logo

WEICHAI WD10 Manual

WEICHAI WD10
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
52
Attached table: the inspection and removal of fault when engine
starts soon stops
3.3 Insufcient Output
Cause Remedy
Fuel lter clogged
Dismantle and clean away dirt and water
replace the lter element if necessary
Air entered into the
fuel system
Check fuel pipe and sealing of the connector
tighten air venting bolt, and drain off the air
Supply pump doesn’t
work
Check piston and valve of supply pump clean
and repair
Poor quality of fuel Clean fuel lter and renew fuel
Idling speed is too low Readjust it
Check whether low pressure fuel passage and quality of fuel are
normal. Come into next step if normal.
● Check whether air lter element, air inlet pipe and turbocharger are
normal. Come into next step if normal.
Check whether valve clearance is normal. Come into next step if
normal.
Check whether air exhaust pressure is too high. Come into next
step if normal.
Contact professional maintenance personnel from professional
maintenance station to check for you.

Table of Contents

Other manuals for WEICHAI WD10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WEICHAI WD10 and is the answer not in the manual?

WEICHAI WD10 Specifications

General IconGeneral
BrandWEICHAI
ModelWD10
CategoryEngine
LanguageEnglish

Related product manuals