Weider 145 - Part Identification Chart

5
M10 x 130mm Bolt (9)–1
M8 Washer (17)–11
M10 Washer (29)–4
M10 Nylon Locknut (30)–6
M10 x 70mm Bolt (26)–5
M8 x 16mm Bolt (28)–3
M8 x 40mm Bolt (27)–8
M8 x 55mm Bolt (25)–2
M8 Nylon Locknut (34)—2
M6 x 16mm Screw (24)–2
This chart is provided to help you identify the small
parts used in assembly. Important: Some parts may
have been pre-assembled for shipping purposes. If
you cannot find a part in the parts bags, check to
see if it has been pre-assembled. The number in
parenthesis below each part refers to the key number
of the part. The second number refers to the quantity
needed for assembly.
Part Identification Chart