6
ASSEMBLY
• Assembly requires two persons.
• Because of its weight and size, assemble the
weight bench in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
two adjustable wrenches
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1. Go to www.weiderservice.com/registration on
your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have internet access, call
1-877-992-5999 and register your product.
1
2. Orient the Base (2) and the Frame (1) as shown.
Attach the Base (2) to the Frame (1) with
two M8 x 60mm Screws (21) and two M8
Washers (18).
2
2
1
21
18
To Next Page
Loading...
Need help?
General