Weider Ultraforce XT 70032 User Manual

WEDER HEALTH and FITNESS
"ҮЕР 5 STEPPER BRACE ASSEMBLY
PART NAM ОН ЕИ СЕ
61 5/16" X2 1/2" HEX HEAD BOLT | + |
62 5/16" X 2 3/4" HEX HEAD BOLT | + |
71 &/16" NYLON LOCK NUT
L] Attach STEPPER BRACE (7) to the
REAR BASE (2) by bolting with a 5/16"
X 2 1/2" HEX HEAD BOLT (61) up
through the Rear Brace and then
through the Brace. Secure with a 5/16"
NYLON LOCK NUT (71).
[] Assemble the upper Brace to the
STEPPER UPRIGHT (3) using a 5/16" X
2 3/4" HEX HEAD BOLT (62) and Бой
through the Upright and then the Brace.
Assemble on а 5/16" NYLON LOCK
NUT (71) AND 5/16" FLAT WASHER (70) and
tighten only finger tight.
STEP 4A TOP FRAME ASSEMBLY ў
8 uu s s
C] Assemble 5/16" FLAT WASHERS (70) оп: мо 5/16" X 2 3/4" HEX
HEAD BOLTS (62) and attach the TOP FRAME (8) to the STEPPER
UPRIGHT (3) by bolting down through the Top Frame and then through
the brackets of the Stepper Upright. Secure with 5/6" NYLON LOCK
NUTS (71). Tighten only finger tight. 2
105
1*O.D.
X
1"
гома
BUSHING
`
^
0
‘Attach
the
ARM
PRESS
BRACKET
(9)
16
the
first
hole
behind
the
welded
bracket
at
the
front
of
the
Top Frame
by assembling
a 5/16"
FLAT
WASHER
(70)
onto a
5/16"
X
2
3/4"
HEX HEAD
BOLT (62)
and
bolting down
through
the
top of
the Frame
and
then
through
the
Bracket.
Assemble
on
a
5/16"
NYLON LOCK
NUT
(71)
and
tighten
62
| only finger tight.

Weider Ultraforce XT 70032 Specifications

General

Brand	Weider
Model	Ultraforce XT 70032
Category	Fitness Equipment
Language	English