To Next PageTo Next Page
Need help?Do you have a question about the WeiderPro Pro 420 Bench and is the answer not in the manual?
Read and follow the manual's instructions for safe operation of the weight bench.
Maximum user weight 136kg. Limits for weight on racks and leg lever specified.
Have a spotter assist you with exercises, especially when using an inclined backrest.
Stop training immediately if you experience dizziness or pain and begin cooling down.
Consult a doctor before starting any exercise program, especially if over 35 or with pre-existing conditions.
Connecting the crossbar to the left and right base mounts using bolts, joint plates, and nylon nuts.
Securing the leg lever closure to the front leg with a bolt and nylon nut, ensuring free movement.
Attaching the footplate and caps to the front leg, then connecting it to the bench frame.
Attaching square caps to stabilizers and base mounts using bolts, joint plates, and nylon nuts.
Connecting the bench frame to the crossbar support using a bolt, washers, and nylon nut.
Sliding bushings onto uprights, attaching them to the base mounts, and installing barbell hooks.
Installing caps into the leg lever and assembling the weight tube with a bolt, washers, and nut.
Connecting the left upright and bushing to the base mount, ensuring tabs align with slots.
Instructions for adjusting the backrest to declined, flat, or two inclined positions using the adjustment pin.
Instructions for adjusting the uprights using the adjustment knobs and ensuring they are at the same height.
Detailed list of all parts for the WEIDER PRO 420, including part numbers and quantities.
Diagram illustrating the assembly of all parts with corresponding reference numbers.
Provides customer service contact details and necessary information for ordering replacement parts.
General
