14 EN WM 100 TD
WM 67841c 03/2015
2 Safety
2.2 General information
• Use of third-party products may lead to functional failures and
restricted fitness of purpose. Biocompatibility may also be
compromised. Please note that in these cases, any claim under
warranty and liability will be void if neither the accessories nor
original replacement parts recommended in the instructions
are used.
•
Repairs, servicing, and maintenance should only be carried out
by the manufacturer or by a technician expressly authorized by
the manufacturer.
• Only connect up the devices and modules permitted in
accordance with these instructions for use. The devices must
satisfy their respective product standard. Position non-medical
devices outside of the patient's immediate vicinity.
•
The operator is responsible for ensuring the compatibility of the
therapy device and all the connected components and
accessories prior to the application with the patient.
Only have modifications to the unit carried out by the
manufacturer, Weinmann, or by a technician expressly
authorized by Weinmann.
• Please observe the section on hygienic preparation in order to
avoid infection or bacterial contamination (see chapter
"Hygienic preparation").
• Also observe the respective instructions for use for the therapy
device, the components, and the accessories.
• Always carry out a function check before using the unit (see
chapter "Function check").