Weinmann prisma20C User Manual

64 EN WM 100 TD
WM 67841c 03/2015
6 Settings in the menu
6.3 Setting time parameters
In the time parameters you set the minutes of the current time, the
time zone, and the required wake-up time.
Requirement The therapy device is in Standby mode.
1. Press the menu button .
2. Press the Time field.
3. Configure the required settings and confirm.
Change
air filter
Changed
Cancel
Here you specify whether you have changed the air filter.
For this function, the authorized dealer must have activated the
air filter reminder.
Parameter Possible values Description
Parameter Possible values Description
Time
Here you can set the current time:
• Select daylight saving time or standard time.
The green background of the symbol shows that this setting
is active.
• Use the arrow keys on the right to set the minutes.
• To set the hours: Select another time zone.
• Select the clock version:
24 hours (0-24)
12 hours (0-12)
You can reset the time to the end of the last therapy at most.
Time zone
UTC -12 to
UTC +12
Here you select the required time zone.
Wake-up time
00:00 -12:00 /
23:59
Here you set the time at which you want to be woken up (see
"5.9.1 Setting the wake-up time and switching on the alarm",
page 54).

Weinmann prisma20C Specifications

General

Brand	Weinmann
Model	prisma20C
Category	Health Care Products
Language	English