weinor BiEasy 15M Go! - Compilation of Technical Data; Wall Bracket Mounting Instructions

Ⓒ weinor GmbH & Co. KG EN | 59
3.4.1 Compilation of technical data
Technical data BiEasy 15M Go!
Operating voltage 3 V DC
Battery type 2 x LR06 (AA)
Protection class IP 20
Permitted ambient tempera-
ture [°C]
0 to 55
Radio frequency [MHz] 869.525
Transmission power [mW] ≤500
Weight (incl. batteries) [g] 140
Delivery including wall bracket
Tab. 3 Technical parameters BiEasy 15 M Go!
The values for your device that are dependent on the
version can be found on the type plate.
3.4.2 Mounting of the wall bracket
The wall bracket consists of a lower and an
upper bracket part.
• Before installing the unit in the required
position, check that the transmitter and
receiver are functioning perfectly.
• Push the bracket upper and lower parts
to separate them.
• Fix the lower part of the bracket onto the
wall using the screws and dowels provided.
BiEasy-15Mgo_weinor_BA_18112801_DE+EN_0218.indb 59 26.02.2018 13:50:46