weinor BiEasy 15M Go! - Status LED Significance

Ⓒ weinor GmbH & Co. KG EN | 67
4.4.2 Status LED
A radio signal is indicated by the status display (LED ring
around the STOP button) lighting up.
ThestatusLEDcandisplaydi󰀨erentcolours:
Status display (status LED) and its signicance
ashingorange Channel not yet programmed
in any receiver
quickashingorange Channel in programming
mode, operation of already
programmed receivers not
possible. In group program-
ming mode, permanent
illumination every 3 seconds
orange then green Receiver has received and
responded to the signal sent
by the radio transmitter
orangethenashingred Receiver has not received
the signal sent by the radio
transmitter
orange, alternating 2x,
then red
Channels in receiver and
radio transmitter deleted
Tab. 8 Statusdisplayanditssignicance
The transmitting power or the radio range will be reduced
through the reduction in the performance of the battery
(decrease in capacity). If the status LED no longer illumi-
nates upon pressing the button, the batteries have to be
replaced (see Section 4.7, Changing the batteries).
BiEasy-15Mgo_weinor_BA_18112801_DE+EN_0218.indb 67 26.02.2018 13:50:47