weinor BiEasy 15M Go! - Troubleshooting

Ⓒ weinor GmbH & Co. KG EN | 83
6 Troubleshooting
Fault Cause Remedy
Drive not running,
status display
does not light up
Batteries are
depleted
Batteries are
incorrectly
installed
Insert new
batteries
Insert batteries
correctly
Drive not running,
status display
ashesredor
orange
1. The receiver is
outside radio
range.
2. Receiver not
operating or
faulty
3. Receiver not yet
programmed
1. Reduce
distance to
the receiver
2. Switch on
or replace
receiver
3. Program
receiver
Desired drive
does not run
Incorrect channel
selected
Select correct
channel
End positions
are approached
inaccurately
End positions not
yet set
Have the end
positions set by
a specialist in
accordance
with the product
instructions
Drive runs in the
wrong direction
Directions
are incorrectly
allocated
Delete transmitter
and reprogram
Tab. 12 Troubleshooting for the BiEasy 15M Go!
BiEasy-15Mgo_weinor_BA_18112801_DE+EN_0218.indb 83 26.02.2018 13:50:48