EasyManua.ls Logo

weinor BiEasy 1M - Approaching Ventilation;Turning Position; Ventilation;Turning Position Approach Requirement; Operation with Combio JA Pulse; Combio JA Pulse Functionality

weinor BiEasy 1M
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© weinor GmbH & Co. KG 18 | EN © weinor GmbH & Co. KG EN | 19
Cleaning
Clean the device with a damp cloth. Do not use a detergent. This
may attack the plastic.
Disposal
Dispose of the device in accordance with the relevant regulations
when you no longer need it.
Troubleshooting
Fault Cause Remedy
Drive not running,
status display does
not light up
1. Batteries are
exhausted
2. Batteries are incor-
rectly installed
1. Insert new batteries
2. Insert batteries
correctly
Drive not running,
status display ashes
red or orange
1. Receiver out of
radio range
2. Receiver not oper-
ating or faulty
3. Receiver not yet
programmed
1. Reduce distance to
the receiver
2. Switch on or re-
place receiver
3. Program receiver
Drive runs in the
wrong direction
Directions are incor-
rectly allocated
Delete transmitter and
reprogram
Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
Item number and name on the type plate
Type of fault
Unusual events occurring prior to fault
• Accompanying conditions
• Own suspicion
Cleanin
Re
p
air

Related product manuals