weinor BiEasy 1M User Manual

© weinor GmbH & Co. KG 2 | EN © weinor GmbH & Co. KG EN | 3
Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety instructions for radio operation . . . . . . . . . . . 4
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Exclusion of liability . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting of wall bracket . . . . . . . . . . . . . . . . . . . . . . 6
Description of the device . . . . . . . . . . . . . . . . . . . . . . 7
Explanation of functions . . . . . . . . . . . . . . . . . . . . . . . 8
Bidirectional radio system . . . . . . . . . . . . . . . . . . . . . 8
Initial operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programming the transmitter . . . . . . . . . . . . . . . . . 10
Programming additional transmitters . . . . . . . . . . . 11
Synchronized programming mode . . . . . . . . . . . . . 12
Stopping programming mode (bidirectional) in
the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Approaching end positions of roller shutter /
awning / Venetian blind . . . . . . . . . . . . . . . . . . . . . . 13
Operation of the transmitter using Combio JA Pulse 16
Deleting positions/deleting transmitters . . . . . . . . . 16
Replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
EC Declaration of conformity . . . . . . . . . . . . . . . . . . 20
Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Safety instructions
Observance of these instructions is a
precondition for safe and fault-free operation and
for the product performing as intended.
• The operator/user shall have read the instructions fully and
understand them.
• The operator shall ensure that the instructions are available to
the user in a legible form.
• The operator shall ensure that all safety measures are observed
and complied with.
• The following safety and installation instructions relate to the
device and not to its accessories or the drive.
CAUTION
Failure to observe these instructions may lead to
injury.
 Observe all safety instructions.
• Never install or use damaged products.
• Only use unmodifi ed and compatible original parts.
• There is a risk of personal injury and damage if the device is
opened without permission, used improperly, installed incorrectly
or operated incorrectly.
• The device contains small parts which can be swallowed.
Transport
• The device may not be used should you have received the
device damaged, despite proper packaging. Complain about any
damage to the transport company immediately.
Installation
• Observe all regulations for installation.
Contents Safet
y
instructions

weinor BiEasy 1M Specifications

General

Brand	weinor
Model	BiEasy 1M
Category	Remote Control
Language	English