24
STEP 3
Continue to pull “C” end thru “B” end. Insert “C” end back thru
the “C-D” SPM
®
FSR Spine as shown. As “C” is pulled further,
unrestrained “D” end will move towards “B” end.
STEP 4
Pull the remainder of “C” end thru until “D” end draws close to
“B” end as shown. While holding “B” end stationary, (using either
a second person or placing a weight on the “A/B” SPM
®
FSR) pull
“C” end the remainder of the way through.
END “C”
END “A”
END “B”
END “D”
To Next Page
Loading...