Weishaupt WCM-FS 2.0 User Manual

6.5.30 Set type of building
With this parameter the control is matched to the construction of the building.
Setting range
light
Building with light brickwork or little insulation.
heavy
Building with heavy brickwork or good insulation.
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key
Heating circuit
.
▶
Press function key
Control behaviour
.
✓
Menu
Control behaviour
is displayed.
▶
Press function key
Type of building
.
✓
Parameter
Type of building
is displayed.
▶
Make selection using the dial knob and save with function key
OK
.
02
Control behaviour
Construction light
End
-
+
Construction 504
End
Standard
OK
light
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
77-106

Weishaupt WCM-FS 2.0 Specifications

General

Brand	Weishaupt
Model	WCM-FS 2.0
Category	Control Systems
Language	English