Weishaupt WCM-FS 2.0 User Manual

6.5.42 Set circulation time
The parameter stipulates the run time of the circulation pump:
▪
with the DHW Boost function,,
▪
following completion of the Legionella protection function,
▪
after activation of H1 contact on the WCM-EM in DHW operation.
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key
DHW
.
✓
Menu
DHW
is displayed.
▶
Press function key
Circ time
.
✓
Parameter
Circ time
is displayed.
▶
Set value using the dial knob and save with function key
OK
.
-
+
Circ time 609
End
Standard
OK
03:00min
00:30min - 20:00min
02
DHW
Legio time 22.00
Circ during Legio Off
Circ time 03:00min
End
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
90-106

Weishaupt WCM-FS 2.0 Specifications

General

Brand	Weishaupt
Model	WCM-FS 2.0
Category	Control Systems
Language	English