Weishaupt WL30Z-C User Manual

Installation and operating instruction
Oil burner WL30Z-C
7 Commissioning
83297902 3/2019-11 La
56-112
7.4 Concluding work
WARNING
Oil leakage from oil pressure measuring devices due to constant load
Oil pressure measuring devices could be damaged and cause environmental pollu-
tion through leakage.
Remove oil measuring devices once commissioning is complete.
Check control and safety devices.
Check tightness of oil carrying components.
Enter combustion values and settings in the commissioning record and/or test
sheet.
Enter setting values on the sticker1 supplied.
Adhere sticker to the burner.
Mount cover on burner.
Inform the operator about the use of the equipment.
Hand the installation and operating manual to the operator and inform him that
this should be kept with the appliance.
Point out to operator that the installation should be serviced annually.
Brennereinstellungen
Datum:
.....................................................................................................
Maß X:
...................................................................................................
mm
Öldruck Großlast:
.....................................................................
bar
Voreinstellung
Luftklappe bei Großlast P9:
........................................
°
Techniker:
...................................................
Ölbetrieb
Punkt L/A n %
P0
P1
P2
P3
P9
Brennereinstellungen
Datum:
.....................................................................................................
Maß X: ................................................................................................... mm
Öldruck Großlast:
..................................................................... bar
Voreinstellung
Luftklappe bei Großlast P9:
........................................ °
Techniker:
...................................................
Ölbetrieb
Punkt L/A n %
P0
P1
P2
P3
P9
1

Weishaupt WL30Z-C Specifications

General

Brand	Weishaupt
Model	WL30Z-C
Category	Burner
Language	English