Weishaupt WG10 Series

Questions and Answers

R
robertjonesJul 29, 2025
What to do if my Weishaupt WG10 Burner is not operating?
- W
  William TaylorJul 30, 2025
  If your Weishaupt Burner isn't working, here's what you can check: * See if the external fuse has tripped and check the fuse. * Ensure the heating switch is turned on. * Verify that the temperature or pressure limiter on the heat exchanger hasn't been triggered; if it has, reset it. * Check if the low water safety interlock on the heat exchanger has activated; if so, top up the water and then reset the interlock. * Make sure the temperature or pressure regulator on the heat exchanger is properly adjusted. * Confirm the boiler or heating circuit control is functioning correctly and is set appropriately.
A
Andrea ReedAug 7, 2025
How to fix a Weishaupt WG10 Burner that is not operating?
- S
  samantha33Aug 7, 2025
  To troubleshoot a Weishaupt Burner that is not operating, consider the following: 1. Check the external fuse and replace it if tripped. 2. Ensure the heating switch is turned on. 3. Reset the temperature or pressure limiter on the heat exchanger if it has triggered. 4. Top up the water and reset the low water safety interlock on the heat exchanger if it has triggered. 5. Adjust the temperature or pressure regulator on the heat exchanger if it is set incorrectly. 6. Check the function and setting of the boiler or heating circuit control.
T
Tammy CooleyAug 18, 2025
Why is my Weishaupt Burner not operating?
- M
  Mr. Jordan WebbAug 18, 2025
  Your Weishaupt Burner might not be operating due to several reasons: * An external fuse might have tripped, so check the fuse. * The heating switch could be set to off, so switch it on. * The temperature or pressure limiter on the heat exchanger might have triggered, so reset it. * The low water safety interlock on the heat exchanger might have triggered, so top up the water and reset the interlock. * The temperature or pressure regulator on the heat exchanger might be set incorrectly, so adjust it. * The boiler or heating circuit control might not be functioning correctly or has not been set correctly, so check its function and setting.