Weishaupt WG10 Series User Manual

Installation and operating instruction
Gas burner WG10…/0-D ZM-LN
7 Commissioning
83300902 1/2019-02 La
47-112
Preset setting pressure
Preset setting pressure determined at multifunction assembly.
One rotation corresponds to approx.1mbar.
1
7.1.6 Set FRS pressure regulator (optional)
Only required for a connection pressure >50 ... 300 mbar.
If the spring used in the pressure regulator is orange (5…20mbar):
Turn setting screws clockwise(+) to its stop.
The setting pressure is reduced to 20mbar.
Do not change this setting on the pressure regulator.

Weishaupt WG10 Series Specifications

General

Brand	Weishaupt
Model	WG10 Series
Category	Burner
Language	English