Weishaupt WG10 Series User Manual

Installation and operating instruction
Gas burner WG10…/0-D ZM-LN
9 Servicing
83300902 1/2019-02 La
71-112
9.7 Removing and refitting fan wheel
Observe notes on servicing [ch.9.1].
Removing
Place housing cover into service position [ch.9.6].
Remove screws4 and remove reducing ring3.
Remove grub screw 1 and remove fan wheel.
Refitting
Refit fan wheel in reverse order and
ensure correct alignment on the motor shaft2,
screw in new grub screw1,
turn fan wheel to ensure it moves freely.
2
1
3
4
1
2
9.8 Remove burner motor
Observe notes on servicing [ch.9.1].
Remove fan wheel [ch.9.7].
Unplug plug number3 and11.
Disconnect + and - hoses.
Undo screws 1 and remove air pressure switch.
Hold motor and remove screws2.
Remove motor.
2
1

Weishaupt WG10 Series Specifications

General

Brand	Weishaupt
Model	WG10 Series
Category	Burner
Language	English