Installation and operating instruction
Gas burner WG10…/0-D ZM-LN
10 Troubleshooting
83300902 1/2019-02 La
83-112
10.1.3 Display flashes
A burner fault has occurred. The burner is in lockout. The error code is displayed
flashing.
Read error code, e. g. A7h.
Rectify cause of fault [ch.10.2].
Resetting
WARNING
Damage resulting from incorrect fault repair
Incorrect fault repair can cause damage to the equipment and injure personnel.
Do not carry out more than 2 lockout resets successively.
Faults must be rectified by qualified personnel.
Press [ENTER].
Burner has been reset.
Fault memory
The last 9 faults are saved in the fault memory [ch.6.2.2].
To Next Page
Loading...
Need help?
General