Power button
• Located on the device housing
• Powers up the monitor
• Opens pop-up dialog with controls to sign out, power down,
and enter Sleep mode
Power down
1. Touch the power button.
2. Touch Power down.
Sign in and select a profile (if enabled)
1. Enter your Clinician ID and password in the respective fields. Touch the keyboard symbol
in each field to enter characters, or use a barcode scanner to scan your Clinician ID first
and then enter your password.
2. Touch Sign in. The Profile selection area becomes active.
3. Touch the desired profile. The corresponding Home tab appears.
Battery status
Charging
Approximate operating time remaining
Battery removed or not holding a charge
Change profile
1. Touch the profile indicator in the Device Status area.
2. Touch the desired profile. The tabs associated with that profile appear across the
bottom of the screen.
Start/Stop blood pressure
Start intervals
1. On the Home tab, touch .
2. Select Automatic, Stat, or Program, and enter or select desired settings.
3. Touch Start intervals.
Stop intervals
1. On the Home tab, touch .
2. Touch Stop intervals.
2
To Next Page
Loading...
Need help?
General
