Time zone Select your time zone offset from Coordinated Universal
Time (UTC).
Daylight savings offset Select daylight savings time.
Automatically adjust clock for daylight savings time,
reported by Connex
Select this to adjust the displayed time by +/- one hour
when the connected host reports daylight savings time.
Height Select centimeters, feet and inches, or inches.
Weight Select kilograms or pounds.
Mains (AC) frequency Select 50 hertz or 60 hertz.
Language Select the device language.
3. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Device
Specify the device settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears at the bottom of the screen and the Regional tab
appears at the top of the screen.
2. Touch the Device tab.
• From the Printer drop-down menu, select a PDF or printer option from the list:
○ Internal
○ PDF to USB
○ PDF to remote file location
○ Internal and PDF to USB
○ Internal and PDF to remote file location
• From the Default patient entry drop-down menu, select New Patient or Worklist.
• Select or deselect the HR beep on.
• Select or deselect the Error beep on.
• Turn Caps lock on or off.
3. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
40 Advanced settings CP 150 12-lead resting electrocardiograph
To Next Page
Loading...
