Welch Allyn MICROTYMP 4 - Performing a Test

Welch Allyn MicroTymp® 4 Tympanometer User Manual
DIR 80024157 Ver A Page 16
PERFORMING A TEST
Testing should be conducted in a quiet environment such as a private examination room. No
specific action is required by the patient during the automatic test. However, the patient must
be advised to remain still and avoid speaking or swallowing while the probe is applied to the ear.
A typical tympanogram measurement and reflex test is carried out as follows.
From the MAIN MENU select NEW TEST:
MAIN MENU
NEW TEST
CONFIGURATION
VIEW THE LAST TEST
Select
Select the ear(s) required for test:
SELECT EAR
BOTH: L, R
LEFT
RIGHT
Back  Select
The message “Deleting last test” will be displayed momentarily and a message displayed to insert
the probe into the ear to be tested: