ROUTINE MAINTENANCE
CLEANING THE MICROTYMP 4
WARNING Electric shock hazard. Before cleaning the device, disconnect the power cord
from the power source and the device.
WARNING Take care to prevent water or other fluid from entering any connectors on
the device. Should this occur, dry the connectors and check the accuracy of all operating
functions.
CAUTION The device is not heat-resistant. Do not autoclave.
The MicroTymp 4 is a precision instrument. Handle it carefully to ensure its continued accuracy
and service. Use a soft damp cloth and mild detergent to clean the instrument panel and case
when required. Ensure no moisture enters the instrument.
If low-level disinfection is required, Oxivir Tb (Diversey, Inc.) a hydrogen-peroxide based solution,
was tested and found to be compatible with the plastic device housing.
EARTIP AND PROBE
WARNING
Handle the probe and accessories with care. Do not allow moisture, condensation,
fluids or debris to enter the probe.
To Next Page
Loading...
Need help?
General
