Align pin to slot in
ophthalmoscope
head
12
13
3. Insert replacement lamp by carefully
aligning pin on lamp shaft with slot in
ophthalmoscope head. Push lamp in until
firmly seated.
NOTE: If lamp surface is touched or becomes
smudged, wipe clean with a soft cloth. This
will assure longer lamp life and higher output.
1. Place thumb on
knurled ring at base
of instrument.
Unscrew transillumi-
nator in a counter-
clockwise direction.
2. Grasp end of lamp
and pull out (use nail
file or similar object
if needed).
3. Insert replacement lamp (No. 03400). Push
lamp in firmly.
Transilluminator Lamp Replacement
PocketScope Handles
AA PocketScope Handles (72830)
1. This handle accepts any brand of AA batter
ies. Use alkaline batteries for best perfmance.
2. The AA handle can be upgraded to a con-
vertible handle, which allows the handle
to be used with AA batteries, Welch Allyn
rechargeable batteries and the Universal
Charger or PocketScope Desk Charger
(obsolete).
The upgrade kit part number 72837 includes
the rechargeable bottom cap (#72810) plus
the rechargeable battery (#72600).
The upgrade kit part number 72860 or
72865 includes the rechargeable bottom
cap, rechargeable battery and the 7114X
Universal Charger with Pocketscope
Adapters.
To Next Page
Loading...
Need help?
General
