Welch MP 601 E - Safety Devices; Meaning of the Warning Notes; Product Standards, Safety Regulations

Important Information
412721 5
1.5 Safety Devices
Measures such as the following are for the safety of the operating personnel:
electrical connection with a protective conductor (operating mode S1) and an earthing
plug
Motor protection device (thermal)
“Hot Surface" label on the pump body - warning notice
The diaphragm pump must not be operated without these elements.
1.6 Meaning of the Warning notes
Take note of the warning notices. They are in the following box:
CAUTION ! / WARNING !
Hazard which may lead to serious injuries or material damage.
1.7 Product Standards, Safety Regulations
Diaphragm Pumps meet the following product standards:
DIN EN ISO 12100:2011-03
Safety of machinery -
General principles for design - Risk assessment and risk reduction
DIN EN ISO 13857:2008-06
Safety of machinery - Safety distances to prevent hazard zones being reached
by upper and lower limbs
DIN EN 1012-2:2011-12
Compressors and vacuum pumps - Safety requirements -
Part 2: Vacuum pumps
DIN EN ISO 2151:2009-01
Acoustics - Noise test code for compressors and vacuum pumps - Engineering
method (grade 2)
DIN EN ISO 2151:2009-01
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements
DIN EN 61000-6-2:2011-06
DIN EN 61000-6-4:2011-09
Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity for industrial environments
Part 6-4: Generic standards - Emission standard for industrial environments
DIN EN 61010-1/A1:2015-04
Safety requirements for electrical equipment for measurement, control and
laboratory use - Part 1: General requirements
DIN EN 50110-1:2014-02
Operation of electrical installations
DIN EN 1127-1:2011-10
Explosive atmospheres - Explosion prevention and protection -
Part 1: Basic concepts and methodology
DIN EN 13463-1:2009-07
DIN EN 13463-5:2011-10
Non-electrical equipment for use in potentially explosive atmospheres -
Part 1: Basic method and requirements
Part 5: Protection by constructional safety 'c'
Directive 2012/19/EU
Electrical and electronics - old devices (WEEE)
Directive 2011/65/EU
Dangerous materials in electrical and electronics devices (RoHS II)
China - RoHS II
Environment protection law - China 2016-01
The following additional safety regulations apply in the FR Germany:
BGV A3
Electrical equipment and operating materials
VBG 5
Power-driven machines
BGR 120
Guidelines for laboratories
BGI 798
Hazard assessment in the laboratory
BGG 919 (VBG 16)
Accident prevention regulations for "compressors"
BGR 189 (BGR 195;192;197)
Use of protective working clothes
Observe the standards and regulations applying in your country when you use the dia-
phragm pumps.