INVERTER TIG PRO WELDERS
This device is a current inverter generator (DC) suitable for welding electrode MMA and TIG
LIFT. Thanks to the inverter technology which allows to achieve high performance and low
size and weight, the welder is portable and easy to handle.
The device is suitable for welding with coated electrodes (rutile, basic, stainless steel and cast
iron) and TIG LIFT welding for many metals except aluminium and alloys. It is a single phase
230V 50/60Hz and can be connected to power generators having power equal to or higher
than that value reported in Page 10.
The machine is equipped with the following functions:
• “MAINS ANALYSIS” - when turns on, the machine performs a series of tests to analyze the
mains supply.
•”HOT START”, “ARC FORCE” and “ANTI STICK” functions.
• “MEMORY PARAMETERS” - the microprocessor stores the welding parameters set during the
last use of the machine allowing automatic recovery at each turn on.
• “VOICE SYNTHESIZER” - it is equipped with a voice synthesizer (the language is selectable at
start), that helps the user during its use.
• “ADJUSTMENT PARAMETERS” - the machine is able to self-adjust its welding parameters
conguration after the user selection.
Page 5
A Control panel
B Negative pole (-)
C Positive pole (+)
D ON-OFF switch
E Power cord
To Next Page
Loading...
