INVERTER TIG PRO WELDERS (cont.)
Page 8
The machine is equipped with a voice synthesizer that accompanies the user during use. For
selecting the language, if it was not previously set at factory, perform the following step at
rst turn on of the machine - when the display shows the desired language, push the knob
“MENU”. The correspondence between language and the display is as follows:
• “IT_” - ITALIAN
• “EN_” - ENGLISH
• “ES_” - SPANISH (optional)
• “RU_” - RUSSIAN (optional)
• “De_” - GERMAN (optional)
• “FR_” - FRENCH (optional)
If the user wants to re-select the language and return to factory settings, perform the
following steps:
• Turn o the welding machine;
• Simultaneously push the knob “MENU” and turn on the welding machine. The display will
show “coo” if successful
• Release the knob MENU. The display will scroll the selectable languages.
• Select the desired language by pushing “MENU”
The machine is able to self-adjust its welding parameters according to the user selection:
• When selecting the type and diameter of the electrode, the onboard microcontroller sets
the value of the welding current;
• When selecting the value of the welding current, the onboard microcontroller sets the
diameter of the electrode of the type previously selected.
VOICE GUIDE
RESET (LANGUAGE AND WELDING PARAMETERS)
AUTO ADJUSTMENT PARAMETERS
To Next Page
Loading...
