CMP203 User Guide
For the LCN Descriptor: input the Service ID and the LCN for the channel line-up of the services.
For the Cable Descriptor: input the correct frequency and SymbolRate for the corresponding TS
output. Cable descriptor depends on the setup you use. Mostly, Cable descriptor is created for 1 TS
only. Some configuration need to be created in each TS.
Still in NIT, you can also create NIT Other.
Here you can also create BAT.
Multiplexing-SI Table Setting> This page is to choose whether to insert/generate the SI tables or
Copy the SI tables from the input streams.
To Next Page
Loading...