CMP203 User Guide
Status>Device Information
Device Information page shows the firmware version, software version, and hardware version of
baseboard and each inserted module.
4.3 System Setting
Click the System Setting on the top right corner to enter the system setting page where you can find
Network, Time Setting, System Manage and Password.
System Setting> Network
In Network page you can assign a static IP address to CMP203’s baseboard. Click the Apply button
on the right side to make the change take effect.
Note to avoid IP conflict when you set the baseboard IP address. The occupied IP section will be
displayed in this page on the top blue area.
To Next Page
Loading...