Wellav Technologies CMP203 - 4 Webgui; Web GUI Overview; Connect the Management Port

To Next Page

To Previous Page

CMP203 User Guide

4 WebGUI

4.1 Web GUI Overview

4.1.1 Connect the Management Port

Factory network settings of the Management Port:

 IP address 192.168.1.10

 Subnet Mask 255.255.255.0

 Gateway 192.168.1.254

Take the following steps to access the Web GUI in a browser.

 Connect laptop/computer to CMP203 management port directly.

 Set the IP address of the laptop/computer in the same network segment with the CMP203

Baseboard IP address. CMP203 will occupy up to 7 IP addresses if it’s fully loaded as each

module has its own IP address including the baseboard. Please avoid possible IP address

conflict between management PC and CMP203 unit.

 Check the physical connection by ping command.