CMP203 User Guide
CMP203 has an embedded gigabit switch inside the chassis, you can use it as a switch to
connect other devices together. The four network ports are respectively used for management and
data transmission .From left to right, port 1& port 2 are used for management, and port 3 & port 4 are
used for data transmission .A good method of checking IP output is to play the IP streams using VLC
player directly.
If you want to connect a switch between CMP203 and PC or other devices, this switch should
support IGMP V2 and IGMP snooping function. If the switch you used is not the correct configuration,
it could cause some network issue.
4.1.2 Logging into the Web GUI
Enter the CMP203 Baseboard IP address into the URL field of any recommended browser (IE8 or
above, Firefox, and Google Chrome) to access the login page. The default user name and password
are both admin. Click Login to log into the GUI.
To Next Page
Loading...