CMP203 User Guide
Service Scrambling> On this page, you can encrypt a service in the Modulation Output. Select a
channel for output and you will see a service list. The module supports up to 6 different CA, select
one of them for encryption as you need, then select the CA ID of the service. Click Apply to finish
setting.
The Modulation Output Channel will only list the enabled channels but not all 32 channels. If the
channels and CA ID to be used are arranged in a chronological order, you can use Batch Setting for
faster encryption. This is advisable if you have 10 or more services in a single channel for output.
See the image below for reference.
To Next Page
Loading...