Wellav Technologies CMP203 - Page 98

CMP203 User Guide
94
Module configuration is similar to IP Setting.
CM2-8VSB-R01>Basic Setting
Click the Apply button on the right side to make the change take effect.
Name
Range
Name
Range
RF level (1=0.5dB)
15~48
PSI/SI Interval (ms)
50~10000
Channel Standard
OFF-AIR
STD
IRC
SRC
Frequency (KHz)
CH2-57MHz
~
CH69-802MHz
CM2-8VSB-R01/R01A >Output

TS setting: Please refer to IP output service configuration.
 To use this board, you need to change the Standard to ATSC in Advance Settings-System
Settings.
 Don’t forget to click APPLY when you finish configuration.