SPEAKER CALIBRATION AUDIO SOURCE SELECTOR BLUETOOTH PAIRING
If you are using a device with Bluetooth
technology, it must be connected for
functions to work.
Slide the right wheel until the blue-
tooth icon is highlighted in the middle.
Then follow the instructions displayed
on the screen.
If a device with Bluetooth technology
is connected to Aquasoul Pro, you
can disconnect it by pressing the
Disconnect button at the bottom of
the screen.
Doing so will also prevent Aquasoul
Pro from automatically reconnecting
to this specific device until it has been
reconnected using the device itself.
TO CALIBRATE YOUR SPEAKERS
Slide the right wheel until the speaker
calibration icon is highlighted in the
middle.
You can calibrate:
• balance
• fade
• subwoofer
Use the sliders to calibrate the speakers
at the desired level.
The fade and subwoofer sliders will
only appear on the screen if the cor-
responding speakers are installed on
Aquasoul Pro.
TO SELECT AN AUDIO SOURCE
Slide the right wheel until the source
icon is highlighted in the middle.
In the menu list, the following sources
are available:
• Bluetooth
• FM
• USB
• Aux. 1
Simply select the desired one to use.
Note that only the sources installed on
Aquasoul Pro will be displayed in the
source menu.
Please note that the Play/Pause and
Change Track functions apply to
devices using Bluetooth technology
and USB, and will not work when AUX is
selected as the source.
Please refer to the Aquasoul Pro
connexions section to learn how to
connect your Bluetooth device.
USER INTERFACE SMART TOUCH
71
To Next Page
Loading...
