SYSTEM INSTRUCTIONS
The filter life indicator triggers the Service light to illuminate. This will prompt
a call from the customer to service the unit and change the filtration. The
indicator can be reset without opening the system, by using a sequence of
motions with the sensors:
a. To reset the filter life: Wave hand in front of hot select one time,
wave hand in front of dispense 5 times, audible chime will
sound, repeat steps again and audible chime will sound again.
TURNING OFF THE ACTIVITY TONE:
The Wellsys W9 purposefully makes a ‘ding’ noise when a sensor is activated
to give audible feedback to the user. In a very quiet environment this feature
may be unwanted. The audible tone can be deactivated without opening the
system, by using a sequence of motions with the sensors:
a. To deactivate the tone. INFO MISSING
To Next Page
Loading...