PREVENTATIVE MAINTENANCE
1. Change filters according to the filter change schedule
2. Reset the filter alert using the instructions above
3. Descale the hot tank
4. Drain the system and use Hydrogen Peroxide to sanitize the system
5. Check all fittings for signs of scale or wear and replace as needed
6. Check condition of the float mechanisms. Pay special attention to
ensure no water has infiltrated the float balls
7. Check solenoids for proper function. Dripping solenoids should replaced
Every 5 years, in addition to the above, perform the following:
1. Replace all internal fittings and tubing
2. Replace LED UV bulb assembly
3. Replace solenoid
To Next Page
Loading...
