Wen 2600-T1 User Manual

SAFETY RULES
‘y,WATCH FOR ME.
Throughcut this manual
you will see my picture,
highlighting areas of
CAUTION and IMPORT-
ANCE. If you do not heed
my warnings, serious in-
4 jury or damage may occur.
WARNING:
When using electric tools, basic safety
precautions should always be followed
to reduce the risk of fire, electric
shock, and personal injury, including
the following:
1.
Read all instructions
Become fully familiar with the chain
saw before attempting to operate it.
. Replacement parts
When servicing use only identical re-
placement parts.
. Keep work area clean
Cluttered areas and benches invite
accidents.
. Avoid dangerous environment
Don't use power tools in damp, wet
locations. Keep work area well lit. Do
not expose to rain. Do not use tool in
presence of flammable liquids or
gases.
. Guard against electric shock
Prevent body contact with grounded
surfaces. For example; pipes, radia-
tors, ranges, refrigerator enclosures.
. Keep children away
Do not let visitors contact tool or
extension cord. All visitors should be
kept away from work area.
. Store idle tools
When not in use, tools should be
stored in dry, high or locked-up place—
out of reach of children.
. Don’t force tool
It will do the job better and safer at the
rate for which it was designed.
. Use right tool
Cut wood only. Don't use chain saw
for purpose not intended—for
example—Don't use chain saw for
cutting plastic, masonry, non-wood
building materials.
Wear proper apparel
No loose clothing or jewelry to get
caught in moving parts. Rubber
gloves and footwear are recom-
mended when working outdoors.
Wear protective hair covering to con-
tain long hair.
. Always use safety glasses.
Also use safety footwear; snug fitting
clothing; protective gloves, hearing
and head protection.
. Don’t abuse cord
Never carry tool by cord or yank it to
disconnect from receptacle. Keep
cord from heat, oil and sharp edges.
. Secure work
Use clamps or a vise to hold work. It's
safer than using your hand and it frees
both hands to operate tool.
. Don’t overreach
Keep proper footing and balance at all
times.
. Maintain tools with care
Keep tools sharp and clean for better
and safer performance. Follow in-
structions for changing accessories.
Inspect tool cords periodically and if
damaged, have repaired by author-
ized service facility. Inspect extension
cords periodically and replace if
damaged. Keep handles dry, clean,
and free from oil and grease.
. Disconnect tools
When not in use, before servicing,
and when changing accessories,
such as blades, bits, cutters.
. Remove adjusting keys and
wrenches
Form habit of checking to see that
keys and adjusting wrenches are
removed from tool before turning it on.
. Avoid accidental starting
Don't carry plugged-in tool with finger
on switch. Be sure switch is off when
plugging in.
. Outdoor use extension cords
When tool is used outdoors, use only
extension cords suitable for use out-
doors and so marked with the suffix
W-A after cord type.
. Stay alert
Watch what you are doing. Use com-
mon sense. Do not operate tool when
you are tired. Keep all parts of the
body away from the saw chain when
the motor is running. Before you start
the saw, make sure the saw chain is
not touching ing.

Wen 2600-T1 Specifications

General

Brand	Wen
Model	2600-T1
Category	Chainsaw
Language	English