Wen 2600-T1 User Manual

FRONT HANDLE GUARD: A structural
barrier between the front handle of a chain
saw and the guide bar, typically located
close to the hand position on the front
handle and sometimes employed as an
activating lever for a chain brake.
BAR TIP GUARD: An attachment that
may be provided on the end of the guide
bar to prevent the chain at end of guide bar
from contacting the wood.
LOW-KICKBACK CHAIN: A chain that
complies with the kickback performance
requirements of ANSI B175.1 when tested
on arepresentative sample of chain saws.
REPLACEMENT SAW CHAIN: A chain
that complies with the kickback perform-
ance requirements of ANSI B175.1 when
tested with specific chain saws. It may not
meet the ANSI performance.
KICKBACK, PINCH: The rapid pushback
of the saw which can occur when the
wood closes in and pinches the moving
saw chain in the cut along the top of the
guide bar.
KICKBACK, ROTATIONAL: The rapid
upward and backward motion of the saw
which can occur when the moving saw
chain near the upper portion of the tip of
the guide bar contacts an object, such as a
log or branch.
REDUCED KICKBACK GUIDE BAR: A
guide bar which has been demonstrated
to reduce kickback significantly.
GUIDE BAR: A solid railed structure
which supports and guides the saw chain.
NORMAL CUTTING POSITION: Those
positions assumed in performing the
bucking and felling cuts.
NOTCHING UNDERCUT: A notch cutina
tree which directs the tree's fall.
OILER CONTROL: A system for oiling the
guide bar and saw chain.
REAR HANDLE: The support handle
located at or toward the rear of the saw.
OPTIONAL EQUIPMENT
CHAIN SAW CHAIN SHARPENER
MODEL 2305-12 VOLT
ELECTRIC CHAIN SAW
CHAIN SHARPENER
MODEL 2306-120 VOLT

Wen 2600-T1 Specifications

General

Brand	Wen
Model	2600-T1
Category	Chainsaw
Language	English