Wen 34034 User Manual

9
UNPACKING
With the help of a friend or trustworthy foe, carefully remove the Lathe from the packaging. Make sure to take
out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list
below to make sure you have all of the parts and accessories. If any part is missing or broken, please contact our
customer service at 1-800-232-1195 (M-F 8-5 CST), or email techsupport@wenproducts.com.
PACKING LIST
TRANSPORTING
When transporting the lathe, carry it by the base or handles. Never carry the device by its guards or its accessories.
Pre-Assembled
Parts & Accessories
Tools
UNPACKING & TRANSPORTATION
WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Failure
to follow the safety instructions may result in serious personal injury.
Lathe
(1)
Spur Center
for Headstock
(MT2)
Live Center
for Tailstock
(MT2)
Handle/Tool
Holder (2)
Rubber Feet
(4)
Hex Wrench
(3mm, 4mm,
5mm, & 12mm)
Wrench
(1)
Knockout Rod
(1)

Wen 34034 Specifications

General

Brand	Wen
Model	34034
Category	Lathe
Language	English