EasyManua.ls Logo

Wen 36725

Wen 36725
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
7-1/4-INCH
CIRCULAR SAW
Model # 36725
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
bit.ly/wenvideo
For replacement parts visit
WENPRODUCTS.COM
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
3087464
Question and Answer IconNeed help?

Do you have a question about the Wen 36725 and is the answer not in the manual?

Wen 36725 Specifications

General IconGeneral
BrandWen
Model36725
CategorySaw
LanguageEnglish

Summary

Technical Data

Safety Introduction

Safety Alert Symbol

Explains the meaning of danger, warning, and caution symbols used in the manual.

General Safety Rules

Work Area Safety

Guidelines for maintaining a clean, well-lit, and hazard-free work environment.

Electrical Safety

Precautions related to power sources, plugs, cords, and wet conditions.

Personal Safety

Advice on staying alert, wearing appropriate clothing, and using PPE.

Power Tool Use and Care

Instructions on proper handling, usage, and maintenance of power tools.

Power Tool Maintenance

Guidance on maintaining power tools for optimal performance and longevity.

California Proposition 65 Warning

Information on chemicals potentially present in materials and their health effects.

Specific Rules for the Circular Saw

Work Environment Considerations

Ensures safe operation in various environments, avoiding wetness and flammables.

Personal Safety Precautions

Mandatory use of safety glasses, dust mask, hearing protection, and appropriate attire.

Preventing Electric Shock

Advice on keeping blades away from electrical cords and using insulated grips.

Tool Inspection Before Operation

Check for damage, missing parts, faulty switches, or cord issues before use.

Lower Blade Guard Safety

Ensures the lower blade guard is functional and covers the blade when not in use.

Supporting the Workpiece

Properly supporting the workpiece to prevent exposure, binding, or loss of control.

Starting the Saw

Start the saw before blade contact with the workpiece and let it reach full speed.

Standing Position

Position body to the side of the blade, not in line, to avoid kickback injury.

During the Cut

Keep hands away from cutting area and blade; do not remove material while blade moves.

Reducing Kickback

Precautions to prevent sudden, uncontrolled saw movement towards the operator.

Turning Off the Saw

Wait for the blade to stop completely before setting the tool down.

Replacing the Saw Blade

Step-by-step instructions for safely removing and installing a new saw blade.

Making Adjustments

Always disconnect power before making adjustments or changing accessories.

Electrical Information

Double Insulation

Explanation of the double insulation system for enhanced electrical safety.

Polarized Plugs

How to use the polarized plug correctly for safe electrical connection.

GFCI Protection

Recommendation to use GFCI protection for reduced risk of electric shock.

Service and Repair

Guidelines for qualified service technicians and using original replacement parts.

Extension Cord Guidelines

Table and advice on selecting the correct gauge extension cord for power tools.

Know Your Circular Saw

Parts Identification

Diagram illustrating and labeling the various components of the circular saw.

Assembly & Adjustments

Setting the Depth of Cut

Instructions on how to adjust the blade depth for different material thicknesses.

Adjusting the Bevel Angle

Steps to tilt the saw blade for bevel cuts up to 45 degrees.

Line-of-Cut Indicators

Explanation of notches on the saw base for guiding cuts at 0° and 45°.

Installing the Rip Guide

Procedure for attaching and using the rip guide for straight lengthwise cuts.

Connecting to Dust Collection

How to attach the dust port adapter and connect to a dust extraction system.

Operation

Types of Cuts

Describes cross-cutting, rip cutting, bevel cutting, and plunge cutting.

Preparing for Operation

Ensures correct setup of the work area, workpiece, and tool before cutting.

Starting and Stopping the Saw

Detailed steps on how to safely start and stop the circular saw.

Operating the Saw

Step-by-step guide on holding, positioning, and moving the saw during cuts.

Cross-Cutting and Rip Cutting

Explains the techniques for cutting across and with the grain of wood.

Bevel Cutting

Techniques for making angled cuts, including compound miter cuts.

Making Plunge CutsPocket Cuts

Procedure for making cuts within the workpiece, requiring guard manipulation.

Maintenance

Replacing the Saw Blade

Step-by-step instructions for safely removing and installing a new saw blade.

Cleaning

Tips for cleaning the tool, ventilation openings, and avoiding damaging solvents.

Carbon Brush Replacement

Guidance on inspecting and replacing worn carbon brushes for motor efficiency.

Product Disposal

Information on responsible disposal and recycling of the product.

Limited Two Year Warranty

Warranty Coverage Details

Details on warranty period, coverage, and exclusions for WEN consumer power tools.

Sellers Obligation and Exclusive Remedy

Defines the seller's responsibility and the buyer's sole recourse for defects.

Implied Warranties

Information on the duration and limitations of implied warranties.

Incidental or Consequential Damages

Exclusion of liability for indirect or resulting damages from product use.

Specific Legal Rights

Explanation of user's specific legal rights that vary by region.

Territorial Coverage

Specifies the regions where the limited warranty is applicable.

Exploded View & Parts List

Exploded View Diagram

Diagram illustrating and labeling the various components of the circular saw.

Parts List

Detailed list of all parts with their corresponding part numbers and quantities.

Related product manuals