To Next PageTo Next PageWhat to do if my Wen 3625 Saw motor does not start?
If your Wen Saw motor isn't starting, first check the power cord, extension cord, power plug, and the outlet to ensure everything is properly connected and functional. Do not use the saw if any cord is damaged. If the cord is not the problem, the power switch, motor carbon brushes, or the motor itself may be defective.
Why is my Wen 3625 Saw cutting ineffective?
If your Wen Saw is not cutting effectively, it could be due to dull or worn cutting blade edges. Replacing the cutting blade may resolve this. Alternatively, the blade might not be installed correctly.
Explains the meaning of safety alert symbols and their importance.
Rules for maintaining a safe and hazard-free work area.
Guidelines for safe use of electrical components and avoiding shock.
Precautions for operator's physical safety, including PPE and attire.
Guidelines for proper operation, maintenance, and storage of power tools.
Instructions for professional servicing and repair of the power tool.
Warning regarding potential exposure to chemicals and health risks.
Defines the intended use and limitations of the circular saw.
Covers personal safety, cord handling, inspections, and workpiece security.
Details safe practices for starting, operating, and stopping the saw.
Covers blade replacement, adjustments, and part replacements.
Explains kickback and provides detailed precautions to minimize the risk.
Safety guidelines for operating the laser guide, including eye protection.
Rules for safe handling, storage, and disposal of batteries.
Explanation of the double insulation feature and its implications for grounding.
Recommendation for GFCI protection to reduce electric shock risk.
Recommendations for selecting and using appropriate extension cords.
Instructions for safely unpacking the saw and its accessories.
Describes the saw's design for quick, versatile cuts through soft wood.
Step-by-step guide for safely installing or replacing the saw blade.
Instructions for setting the correct cutting depth using the scale or workpiece edge.
Explanation of the cutting guide indicator for accurate cuts.
How to use the laser for indicating the line of cut and safety warnings.
Guide on how to install and adjust the rip fence for straight cuts.
Instructions for connecting the dust extraction hose for improved air quality.
Steps to adjust the saw blade bevel angle from 45° to 90°.
Steps to prepare the workspace and tool before starting operation.
Detailed instructions on how to hold, start, and operate the circular saw safely.
Pre-operation checks for tool condition and safety.
Procedures for cleaning the tool and proper storage methods.
Information on lubrication requirements for the tool's bearings.
Guidelines for responsible disposal and recycling of the power tool.
Lists causes and solutions for the motor failing to start.
Identifies reasons for poor cutting performance and their remedies.
General
