Wen 3625 User Manual

PROBLEM CAUSE SOLUTION
Motor does
not start
Power cord damaged or not properly
plugged in.
Check the power cord, extension cord, power plug
and the power outlet. Make sure the outlet is func-
tional. Do not use the tool if any cord is damaged.
Defective power switch.
Stop using the tool and contact customer service at
(800) 232-1195, M-F 8-5 CST for assistance.
Motor carbon brushes (Part No.
36703-011) are worn.
Stop using the tool and contact customer service at
(800) 232-1195, M-F 8-5 CST for assistance.
Defective Motor.
Stop using the tool and contact customer service at
(800) 232-1195, M-F 8-5 CST for assistance.
Ineffective
Cutting
Cutting blade edges are dull/worn. Replace the cutting blade (see page 11).
The blade is not installed properly.
See instructions for properly installing the blade on
page 11.
TROUBLESHOOTING GUIDE
WARNING: Stop using the tool immediately if any of the following problems occur. Repairs and
replacements should only be performed by an authorized technician. For any questions, please
contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at
techsupport@wenproducts.com.
17

Wen 3625 Specifications

General

Brand	Wen
Model	3625
Category	Saw
Language	English