To Next PageTo Next Page
Need help?Do you have a question about the Wen 3960 and is the answer not in the manual?
General| Max Cutting Depth | 3-5/8 inches |
|---|---|
| Speed | 2460 FPM |
| Type | Band Saw |
| Bevel Capacity | 0 to 45 degrees |
| Dust Port Size | 2.5 in. |
Covers essential safety guidelines for tool operation, including awareness, work area, personal protection, and tool handling.
Provides safety instructions tailored to band saw operation, covering setup, blade use, workpiece handling, and cutting techniques.
Details the importance of proper grounding, plug requirements, and safe extension cord usage to prevent electric shock.
Recommends proper extension cord selection based on amperage and length, and advises on cord maintenance and circuit protection.
Guides on carefully unpacking the band saw, checking parts for damage, and preparation before assembly.
Detailed instructions for attaching feet, mounting the table, securing the saw, and installing accessories like the fence and miter gauge.
Instructions on how to adjust and lock the saw table to the desired angle using the tilting knob and indicator.
Procedure to adjust the upper band saw wheel to ensure the blade runs centered on the wheels for optimal cutting.
Details on adjusting blade tension correctly to prevent breakage or slipping, with guidelines on flex tolerance.
Guides for adjusting the height and position of upper blade guides and thrust bearings for proper blade support.
Instructions for adjusting lower blade guides and thrust bearings to ensure correct blade alignment and support.
Step-by-step guide for safely removing and installing a new band saw blade, including tensioning and alignment.
Instructions on how to turn the band saw on, off, and lock the switch using the safety key for secure operation.
Guide on how to install and set the miter gauge for angled cuts on the band saw table.
Advice and steps for safe and effective general cutting, including checking settings, blade guard, workpiece pressure, and cutting types.
Provides recommended minimum radius for different blade widths for performing circle cuts.
Details routine cleaning of sawdust, pitch, and guides, plus table maintenance and replacement of worn parts like blades and tires.
Covers WEN power tools for two years (90 days professional use), detailing defect coverage for material and workmanship.
Details claim requirements, proof of purchase, shipping, and lists accessory items excluded from warranty coverage.
Addresses implied warranties, liability limitations for damages, and specific legal rights varying by location.
