Wen 3966

Model # 3966
14-INCH BANDSAW
WITH STAND
bit.ly/wenvideo
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)

Wen 3966 Specifications

General

Motor Power	15 Amps
Blade Diameter	10 inches
Arbor Size	5/8 inches
Max Cutting Depth at 90 degrees	3-1/2 inches
Bevel Capacity	0-45 degrees
Amps	15 A

Summary

General Safety Rules

Specific Rules for Band Saw

Electrical Information

Grounding Instructions

Assembly

Assemble the Stand

Steps for assembling the stand for the band saw.

Assemble the Table

Steps for attaching the table to the assembled stand.

Adjustments

Tilting the Table

Adjusting the Saw Blade

Steps to ensure the saw blade tracks correctly on the wheels.

Adjusting Blade Tension

How to properly set the tension for the saw blade.

Upper Blade Guide Adjustment

Adjusting the upper blade guide and bearings for proper blade support.

Lower Blade Guide Adjustment

Adjusting the lower blade guide and bearings for blade stability.

Changing the Band Saw Blade

Step-by-step guide for safely replacing the saw blade.

Maintenance

Operation

Suggestions and Warnings

OnOff Switch

Using the Push Stick

General Cutting