Wen 3966 User Manual

ADJUSTMENTS
13
LOWER BLADE GUIDE ADJUSTMENT
WARNING: The lower blade guide must be adjusted
after every blade change and tracking adjustment.
1. Loosen the set screw (Fig. S - 3) and move the entire lower
blade guide. Adjsut the guide bearing to a position of 1 to 2 mm
from the bottom of the blade. Retighten the set screw (Fig. S - 3).
2. Loosen the socket head bolt (Fig. S - 1) and adjust the thrust
bearing a position of .5 mm from the rear of the blade. Retight-
en the bolt (Fig. S - 1).
3. Loosen the bolt (Fig. S - 2) and adjust the guide bearing to a
position .5 mm away from the blade. Retighten the bolt (Fig. S -
2).

Fig. P
1
2
3
Fig. R
Fig. Q
Fig. S
1
2
3
ADJUSTING THE CUTTING SPEED
1. Open the lower cover. Slacken the driving belt (Fig. U) by turning the drive belt tension setting knob (Fig. V - 1)
clockwise.
2. Place the driving belt on the desired speed settings (Fig. T) and retighten the drive belt tension setting knob.
Fig. T Fig. U
Fig. V
1

Wen 3966 Specifications

General

Brand	Wen
Model	3966
Category	Saw
Language	English