7
AMPERAGE
REQUIRED GAUGE FOR EXTENSION CORDS
25 ft. 50 ft. 100 ft. 150 ft.
9.5 A 14 gauge 12 gauge
Not
Recommended
Not
Recommended
KNOW YOUR BAND SAW
A Tension Knob
B Light ON/OFF Switch
C Machine ON/OFF Switch
D Locking Fence
E Fence Lock
F Upper Housing Knob
G Blade Guard Adjustment Knob
H Blade Guard
I Blade Bearings Adjustment Knobs
J Tension Release Lever
K Miter Gauge
WARNING: For your own safety, read the instruction manual before operating the band saw.
1. Wear eye protection.
2. Do not wear gloves, a necktie, jewelry, or loose clothing.
3. Make sure the saw is on a firm, level surface and properly secured.
4. Use only the recommended accessories.
5. Use extra caution with very large, very small, or awkward workpieces.
6. Keep hands away from blade at all times to prevent accidental injury.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
L Lower Housing Knob
M Table Bevel Lock
N Dust Port
O Blade Tracking Adjusting Knob
P Lower Spindle Tracking Adjustment
Q Capacitor Box
R Motor
S Dust Collection Drawer
T Belt Tension Adjustment Knob
Q
S
T
To Next Page
Loading...
Need help?
General
